Iv noticed after flying a few approaches with my Justflight arrow and warrior that the auto switch from GPS to VLOC does not happen.  I just get a message asking me to switch. I then have to activate the ILS frequency and press the CDI button. Is this because this feature depends on the planes own real life avionics?
Also sometimes have issues when pressing the cdi button from gps mode to VLOC. VLOC say on for a second then switches back to gps (physical nav/gps button will not move) But if on VLOC mode pressing the cdi will switch to gps mode along with the mechanical nav/gps button on the piper physically switching.
Pressing the Nav/gps switch on the piper Will reliably switch modes gps and VLOC.

So I'm curious what people are using, as I'm having problems with both on an external touch screen.

The standalone EXE works pretty well and can be launched on the 2nd screen maximized and receive touch input.  The main problem here is that as soon as I interact with it, the keyboard focus is moved, so FS won't receive any commands until I manually click back to the FS window.  Is this expected? Or are there any commons utilities folks are using to get the focus to switch back to FS after a second or so?  Also, on the 310, there are 2 GPS panels.  When I use the standalone EXE, both of them go black.  Ideally there would be a way to still have one of them active in the VC while the other is external (for instance, I'm using the 650Xi external, as the aspect ratio works better for my screen), so would love to still have the 750 in the VC.  

The Virtual Cockpit integration is a bit wonky (on the Cessna 310).  If I move around to just the right place, I can right-alt click and snap out the TDS window.  Otherwise it seems to always find the standard Asobo GPS windows - even though they are invisible.  Once I have the window, I can move it to the second screen and maximize for input, but unfortunately touch doesn't seem to work correctly.  I can drag the map around OK, but when I try pressing buttons, I hear an odd ding sound rather than the usual button click - and the button doesn't work.  Maybe it is handling mouse vs touch differently.   Also, I don't get a bezel if I use the VC integration, so that makes things harder, but workable.  So the VC mode is probably the best for the 310 if I can get the mouse/touch working correctly.

Anyway, I'm interested in what works best for folks.
Thanks!

Doing a long flight last night, switching in and out of external views to admire the scenery and I eventually noticed that the GTNXi had stopped updating (both devices on the 310) and I had far overshot my turn.  I could hear sounds when I clicked the knob/menu button, but the touchscreens didn't respond - and even stayed lit when I toggled the avionics master in desperation.  Sounds like it maybe lost its connection to the back-end?
Are there any logs/debug info I can grab or view if this happens again?

hi

i have installed the trainer and another one  and bought justflight pa28 arrow and configured  avonics and setting.   but running msfs , i still see old default pa28 gauge , no digital display at all

please help

Attached Files

Thumbnail(s)
   

Installed the package and launched in the Milviz Cessna 310R, but I can't click most buttons in the left panel and a few more in the right.  It's as if the mouse clicks are getting intercepted by another component.

Video here.  Note, I am constantly clicking while moving the mouse:
https://1drv.ms/v/s!ApGsP96mYFT9u99LSNHP...A?e=2CgjwD

Ideas?
Thanks!

Will NOT work in VC mode.

Countless hours and still no joy.
I think the installation of the trainer is the problem. Because when the install tries to finish “installing”, the message Already Installed. GARMIN, and another window emerges from RealityXP alerting me a new version is available. 
I think my system has a conflict with an existing Garmin Aviation trainer used in Xplane’s RealityXP Garmin GNS v2!!!   So I have 2 software providers trying to use the same trainer app.
Are these mutually exclusive?
I m unable to install 20.20 Garmin trainer, . It is older than what is currently installed. 3.3.10. “Desired version 20.20.10.”
It appears I must uninstall my RealityXP Garmin GNS v2 (xPlane). Reinstall your software. Eliminate conflict, install your more current Garmin trainer.

I uninstalled the old Garmin trainer, reinstalled tds Garmin trainer, reinstalled flightsimulator. Started desktop icon, flightsim is connected. Tds is in gauge mode. The gauge is blurred. Blurred. It should not be. I go to Milviz310, gauges shows the 750 gauge with all radio, zoom, back, message and airport layout, runways. Is unresponsive to mouse. It’s trying to work but…..flickering will not stop. I notice 2 32 bit gtn files…and gtnxi flightsimexec in background tasks running. What’s with that? I run a 64 bit machine. I’m back to where I was three days ago. No ideas anymore.

After some time the installer always gets stuck and displays remaining time is 0 min and 0 seconds even though the download and install isnt finished

Attached Files

Thumbnail(s)
   

Hey everyone, is there anyway to cross-over and sync all flight plans and procedure data between the gtn 750 and 650? would like to keep comms and nav radios separate but would like for flight plans and the visual map waypoints to sync if possible.

Thanks!

Good morning

yesterday I had a problem running GTNxi and the analog instrumentation that I use from air manager with the Baron G38 (without any type of mod added for this plane).
Today I decided to see what was happening again, when when I opened TDSGTNxi.exe, it has retourned me an error related to a dll file for windows that I had not finished reading correctly. In short, seeing that the problems accumulated I uninstalled GTNxi , however when installing  it again, TDSGPSmanager returned the message "Extraction error:-111", I am completely lost, how can I solve this error to reinstall the program?

All the best

I'm having an issue with the TDS750 in the C208. I can't press any of the buttons in the top two rows. I can press everything in the bottom row, however. Additionally, in order to change the COM/NAV frequencies, I have to press at the very top for them to switch between Active and Standby. I have tried the module in the H145 and C310 and both seem to be working fine. It's as if something is blocking my ability to press anything in the top 2 rows. Any thoughts or ideas as to why this might be happening? I have updated all of the Garmin/TDS software. MSFS is also updated. This issue was not present before the latest MSFS update. 

Thanks in advance.