Black screen only after big update to win 11  yesterday.

Using the JustFlight Piper Turbo Arrow IV I was just flying the "RNAV 08L Z gps LPV" approach.
I expected to get the Glideslope on my HSI since this is an LPV approach.

Just before reaching the FAF (PIKMI), the Glideslope actually became alive but was jumping from bottom to the correct position up and down all the time instead of staying steady. 
Same for the vertical guidance needle on the NAV1 instrument.
It was just like the GS was turned off and on all the time.
This behavior remained the same for the whole final approach.
My coupler dial for the autopilot was on NAV (even though LOC is recommended for localizers), but I don't think this is an issue.

Did someone experience this behavior? Is the HSI GS not supported on the JF PA28R with the TDS GTN750?
When switching to NAV1 ILS frequency, the GS worked as usual.

If that matters: I was running the TDS GTN750 as standalone, no VC integration (GNS530 selected in the cockpit).

Just noticed the Known Issues section:

Quote:The HSI displays only horizontal deviation when in GPS mode, unfortunately vertical deviation is not yet supported.

I'm loving the VC integration of the GTNXi, but since I have a small touchscreen for the home cockpit that could display the GTN750, I'd really love to have the option to have the standalone window available additionally to the VC integrated one.

Currently I need to choose between the two and having the cockpit not showing the GTNXi just because I want to use it on my touchscreen makes the cockpit look weird since then it displays the default MFD of the G1000 or the GNS530 for instance (in the JustFlight Pipers).

Is it possible to achieve them both in parallell? Even if it costs performance I'd like to be able to try it out.

We are proud to announce that the C414 has full support for the TDS GTNXi in dual 750Xi configuration.
A lot of work has been put by both companies into creating the perfect integration of the TDS GTNXi, with full HSI vertical and lateral needle control for a perfect RNAV LPV implementation, as well as a high accurate GFC autopilot representing correct phases of flight.

The Flysimware C414 is a game changer for the MSFS add-on industry and we recommend all customers interested to look into it as a state of the art MSFS add-on that should not be missed from your virtual hangar!

https://www.flysimware.com/FLYSTORE_2015...s2020.html

Hello,

Is the GPS supposed to automatically tune ILS frequency and swtich CDI to NAV radio ahead of reaching glideslope intercept point if approach is activated? Or should I be doing doiing this manually? 

Thank you,
Michael

is there a possibility to display weather in USA ?
Connext
SiriusXM
FIS-B

Why does the GTNXi always default to Waypoint or add a waypoint instead of starting at Origin first so I can enter the airport taking off from, then destination so I can add where I am flying to, THEN add waypoints? I never see Origin and destination entries only add waypoints, very frustrating. 

All I ever see, even when starting from a new flight plan is "Add Waypoint".  Also for some reason, I have ran into a number of airports in MSFS that are not in the GTNXi 750 database.  Any help appreciated.

Thank you 

Don

Greetings, I purchased and installed the latest available TDS and Garmin trainer software on 3/15/22. I have been able to use the GTN 750 successfully in VR in the Asobo Baron and the other MSFS aircraft advertised on the TDS website. Yesterday I purchased the Just Flight Turbo Arrow series on the MSFS steam portal ( my MSFS install is Steam) in anticipation of being able to use the fully integrated GTN VC. I am not seeing the GTN 750 nav option available on the JF Arrow configuration ipad. I’ve checked and verified the proper Gage and WASM file install locations referenced in other threads here and everything looks like it’s where it should be. The only options available are the default JF Navs. I’ve waited four minutes before checking the iPad and still no joy. Thanks in advance for any help!

Hello everyone,
I don't know how I managed it, but for quite a while GTNXi started automatically when I started MSFS.

After I reinstalled MSFS because I switched to a larger SSD, GTNXi no longer starts automatically.

What do I have to do to get GTNXi to start automatically again along with MSFS?

Thanks in advance
Raller

Bonjour,

Here is my problem:

I use the Kodiak 100 a lot and bought the GTN750 from PMS. And I am very disappointed with the product, already because of the obligation to pay navigraph cards (90€ per year) which is really exaggerated!
And the impossibility of having other cards.
And by a dizzying drop in FPS when I use the Gtn 750 in windowed mode, I go from 48 fps to 22-23!

1) does the TDS GTNXi make it possible to integrate maps of Europe (including France) or any other country where there is only the map of North America to follow our flights and make Pvols?

2) Can we integrate airport cards and know how?

3) do these maps appear superimposed on the map?

4) If I disable in Fs20 the Nxi G1000, so that it is compatible with Tds GTNxi what will be the functionalities or the problems
that I will encounter with the Kodiak 100?

5) I understood that I will be able to use Tds GTNxi, in windowed mode and I can deport it to another screen without losing FPS?

6) I saw on the site: the option of 14 days to be refunded if you are not satisfied with the product, for that I thank you, because without a demo it is impossible to know if the product will be perfectly usable with our material. In the event of a refund request, what is the deadline, please.

I thank you for your answers 

Cordially