Hi everyone, 

Everything seems to be working fine, except for one thing: In the TDS GTNXi Flight Sim - 1.0.1.2 (meaning: the configurator), none of the changes I'm making in the settings tab are ever being saved. For example, changing the VFR squawk code from 1200 (US) to 7000 (EU), turning off the key sounds etc. 

When I open one of the GTN units in the Avionics tabs to test the new settings, everything is working. However, after shutting down the configurator, all the above mentioned changes are gone. Am I doing something wrong?

Best regards
Stefan

PS. I recently upgraded to Win11, if that's of any importance.

I had a previous post regarding the just flight Arrow where I couldn't get the autopilot to follow the gps.
I have also tried this in the C414 and the same problem. It works with heading mode in the settings, but not with nav mode.
When I select the gps mode in goes into standby mode ( lower box ) in the autopilot and rol mode remains active. When I change to heading mode in the settings, the heading mode goes into the active ( top box ) on the autopilot and the gps remains in the standby, and it will track the gps path .

I downloaded the PMS GTN to try it and it works as normal. e.g. the GPS shows in the active box and it tracks the gps, so it is only an issue with the TDS GTN. I seem to be the only one having this problem.

I have deleted all autopilot settings in the sim, but it makes no difference. ( looking for a conflict ). I am using the alpha and bravo .

** update ** the problem appears to be with the garmin trainer. If I run it from the start menu, it initialises and then closes down. I think the TDS GTN is unable to read the trainer. You may remember that you had to manually install the garmin trainer for me when the TDS first came out. It worked fine in standalone, before the cockpit intergration ( 1.0.1.2 ) version came out. There appears to be something in my laptop blocking the trainer from running. I has access through the windows defender firewall. The program Aviation_Trainer_Launcher.exe will start and shut down after about 10 seconds.

Currently, the user must use the (L:TDSGTNXI_InstrumentPanelSelfTest, bool) variable to set the needles and flags on the HSI for the test page check to work correctly.

However, I use the TDS variables for the flags and for the needles, so I should expect that the GTN would set these variables correctly when on the test page, and the user would not have to code for this..

Is there a plan to change this behavior?

Hello,

What is the typical timeframe to wait for the actual download after purchasing? I purchased the GTN over an hour ago, and still haven't received a download link.

Thank you,
Lance W.

Hello

Can someone please help, as I have downloaded the TDS GPS Manager, but when I go to run the executable, nothing happens?

Many thanks
Darren

hello

I just bought this GTN because I was having VOR to VOR issues with the PMS50.
Now this issue is gone with your GTN, but now I'm having problems with ILS. It
just won't lock On the beam. The needle moves but the plane won't intercept it. I tried many ILS at different airport
and they all the same. Yes I'm out of "GPS" mode and the "APP" is on.

Anybody has this issue like this?
Help please!!!

Can someone help please.
In the standard Asobo aircraft the GTNXi is very dark and is only the screen inside the G1000, see attached.

Is this correct or do I need to do something to increase the brightness of the GTNXi in the cockpit

See attached file.
Thanks

Attached Files

Thumbnail(s)
   

Hello

I have just purchased the PA-28R Turbo Arrow 111/1V from MSFS marketplace but I don't have the GTN 740 showing in my aircraft. I just have the normal NAV stuff.

Please help.

Regards

Colin

Hi,
The install of the trainer and the software seemed to go fine.
It works a a stand alone pop out type screen. I have the green connected to sim message, but the cockpit 750 remains off (I made sure it was the correct livery for the GTNXI 750).
I read your response to the same problem yesterday, I checked I was running version 1.0.0.7 and also checked the community folder for the tds-gtnxi-gauge folder, but it wasn't there.
I had a look at the log files, and may have spotted a problem. The TDSGTNXiExel log shows:

[01/04/2022 12:10:15.026 00004f7c INFO] TDSGTNXiFlightSimEXE.exe version 1.0.1.2
[01/04/2022 12:10:15.102 00005ce8 INFO] Detected double installation of MSFS from Windows Store and Steam
[01/04/2022 12:10:15.251 00003564 INFO] Got Version: 8
[01/04/2022 12:10:16.150 00003564 INFO] GTNProxy::Open Services DLL Version: 1.0.1.2
[01/04/2022 12:10:19.049 00003564 INFO] Got Version: 8
[01/04/2022 12:10:19.049 00003564 INFO] GTNProxy::Open Services DLL Version: 1.0.1.2
[01/04/2022 12:36:55.926 00004ba0 ERROR] Received Simconnect Exception with id: 1 and val: 3
[01/04/2022 12:37:02.461 00004ba0 ERROR] Received Simconnect Exception with id: 1 and val: 3
[01/04/2022 13:51:50.838 00004ba0 INFO] Received Simconnect Quit
[01/04/2022 13:51:50.967 00004ba0 INFO] Closing program automatically with MSFS
[01/04/2022 13:51:50.969 00004f7c INFO] Received Exit Message
[01/04/2022 13:51:51.165 00004f7c INFO] Ending EXE Process

It's detected a double installation of the Steam version and the Store version. I never fully installed the Steam version, the install kept hanging, eventually I installed the Store version instead.
Could this be why I don't have the Gauges folder in my Community folder?

Just for information, this is the 750 unit log:

[01/04/2022 12:10:16.846 0000491c INFO] TDSGTNServices.dll version 1.0.1.2
[01/04/2022 13:51:51.272 0000491c INFO] Ending Process

Thanks
Eugene

Hi, Just purchased today and have been using in the Cessna 414a. Of the two flights I have just flown the left side display freezes about 15-20minutes into the flight. The right side continues to work as normal. Any idea how to fix?