Hi,
I have found out that some small airfields are missing in the databse - but they are visible in G1000/Nxi - is it possible somehow for the GNT750 to display all MSFS content?

Thanks

Hi,

Can the TDS GTNXi750/650 also be used in VR?
Don't see it in the MSFS2020 menu anyway.

I only see the GTN750 from PMS50 ...

Best Regards,

Clement

hello all!
I'm trying to find the license key that I need to enter into the GTN 750 to activate it, but I've checked the invoice, account on the website, etc.. and cant locate it...Anyone know where I need to go to find it?

Hello,
I purchased the GTNXI for MSFS and own both the cessna 414 and the Piper arrow. 
With both planes I consistently get a black screen. 
I have tried all method I was able to find on this forum :
- I uninstalled FRAPS
- I reinstalled all GTNXI files several times 
- I checked for any key or joystick bindings for Master Avionics
- Even if I load a fully started plane (on the runway), I only get a black screen

Please help, as in my situation I find the price quite high for just a black screen

Michel

Hello. Installed tds-gtnxi-c172sp and tds-gtnxi-gauge, both installed in community folder, when I start Msfs 2020 I see this, see picture. Shouldn't the window fit in the Garmin screen?
Sorry for my bad english!

   

I have purchased the SWS RV14 and the TDS GTN Xi and am getting a black screen.

I have downloaded the TDS version of the RV14.
I have exemptions set up in AVG anti virus.
Garmin Aviation Trainer works.
TDS GTN Xi works in stand alone.
TDS GTN Xi launches when MSFS starts and shows in guage mode.
I have uninstalled and re-installed both the RV14 and the TDS GTN Xi files.
The .wasm guage file is in the Guage folder.

Log File:

[21/04/2022 14:57:21.187 00003ddc INFO] TDSGTNXiFlightSimEXE.exe version 1.0.1.3
[21/04/2022 14:57:21.361 00002700 INFO] Got Version: 8
[21/04/2022 14:57:21.361 00002700 INFO] GTNProxy::Open Services DLL Version: 1.0.1.3
[21/04/2022 14:57:23.447 00000484 ERROR] Received Simconnect Exception with id: 1 and val: 7
[21/04/2022 14:57:23.447 00000484 ERROR] Received Simconnect Exception with id: 1 and val: 7
[21/04/2022 14:57:23.447 00000484 ERROR] Received Simconnect Exception with id: 1 and val: 7
[21/04/2022 14:57:31.543 00002700 ERROR] ^^^ GTNProxy::Open Error starting process C:\ProgramData\Garmin\Trainers\GTI\Production\GTI__GTN_Xi__20_20\app-20.20.13\bin\GTN_Simulator.exe
[21/04/2022 14:57:31.543 00002700 ERROR] Error closing program: 299
[21/04/2022 15:15:11.166 00000484 INFO] Received Simconnect Quit
[21/04/2022 15:15:11.292 00000484 INFO] Closing program automatically with MSFS
[21/04/2022 15:15:11.292 00003ddc INFO] Received Exit Message
[21/04/2022 15:15:11.389 00003ddc INFO] Ending EXE Process

What other info would be helpful to get this resolved?

What can I verify/correct to get this working?   Thanks for any help.

I tried the same airports ( LEPA to LEIB ) , different aircrafts ( PA28 Turbo and C414 CW and then other stocks like C208 caravan g1000 and c172 with g530 )

And when i filled up all the info on my FPL, With your gtn750xi when Im talking with the stock ATC on MSFS2020, and ask for clearence, they just give me an VFR departure... not my IFR !


I'm suspecting that the stock atc from MSFS2020 thinks that I dont have any FPL entered on my aircraft. And this only happens with your product !



Thank for all of your work anyways !!!

Hi,

Since installing the TDS GTNXi software and the RV 14 combination into MSFS 2020, I have been getting the following message every time I start up the simulator:

"We have detected that Windows Hardware-accelerated GPU scheduling is turned ON"  

SEE ATTACHED JPG

After removing the TDS GTNXi and RV 14 modules from the Community Folder, this message still comes up.

Is this an issue you plan to fix in the future, if not, how do I remove prevent this error message from returning?

William Clark

Attached Files

Thumbnail(s)
   

Here is my thread over my problems with the TDS GTNXI Flight sim 
 
I installed the Chessna 414AW in MSFS. With TDSGPS manager I installed the Garmin  Aviation Trainers and the TDS GTNXI Flight sim. After the software was installed I started MSNFS2020. Loading Cessna 414 N427RC GTN750XI and I started the TDS GTNXI Flight sim. TDS GTNXI flight sim was connected and in Gauge mode.

 I replaced de tds-gtnxi-gauge file from the Community folder. After a restart from msds2020 and loading the Cessna 414 N427RC GTN750XI and the TDS GTNXI Flight sim and de sim was connected and not in Gauge mode. I don't use VC.

After starting the Cessna 414 N427RC GTN750XI the plane was ok but the screen was black

Can you help my?

Attached Files

Thumbnail(s)
           

Hello,
I can't understand all of them.
I installed via TDS GPS Manager the Trainer as well as the GTNXI for MSFS.
When I run the Cessna 414, the 750XI works fine. I would like to have it on my tablet. So I have to use the trainer? Who will be connected to MSFS? When I launch the trainer, I have an error: Unable to communicate with trainer: Unable to open interface error code 2.
I'm doing something wrong, but I don't know what.
Sorry for the English... and thanks for the help.