03-21-2022, 06:48 PM
Hello Don,
Thank you for your questions and for reaching out, let's get them clarified. For this message, we will make reference to the real world GTNXi Pilot's Guide version 20.20 which is found in your installation, inside the Aviation Trainers, Resources tab!
The Pilot's Guide is the exact manual that is being used by real world pilots into the actual unit, it is not a pseudo-simulation or something fake. The same applies to the actual TDS GTNXi, whatever you see and use in terms of functionality is exactly what happens in real life, our unit is accurate in that regards to the actual GTNXi unit.
The flight planning in the TDS GTNXi is not an origin/destination input, as you have asked, this is not accurate and does not occur in real life. In the GTNXi, after about 1 minute of loading, the origin airport will auto populate as the first field. You can also add airport Departures and Arrivals/Approaches in the Procedures page.
The Origin/Destination may be available in other competitor products/default GPS systems, but based on real life data, this is not a feature of the GTNXi.
Regarding airports, you can always add your own User Waypoint using the Airport type, with a few digital taps on the screen, pleas refer to the manual for information on how to achieve this. The database that we provide is accurate to whatever a real pilot would see in the airplane, whatever may be missing are very small, private airports, hence the ability to add these yourself.
Good luck.
Thank you for your questions and for reaching out, let's get them clarified. For this message, we will make reference to the real world GTNXi Pilot's Guide version 20.20 which is found in your installation, inside the Aviation Trainers, Resources tab!
The Pilot's Guide is the exact manual that is being used by real world pilots into the actual unit, it is not a pseudo-simulation or something fake. The same applies to the actual TDS GTNXi, whatever you see and use in terms of functionality is exactly what happens in real life, our unit is accurate in that regards to the actual GTNXi unit.
The flight planning in the TDS GTNXi is not an origin/destination input, as you have asked, this is not accurate and does not occur in real life. In the GTNXi, after about 1 minute of loading, the origin airport will auto populate as the first field. You can also add airport Departures and Arrivals/Approaches in the Procedures page.
The Origin/Destination may be available in other competitor products/default GPS systems, but based on real life data, this is not a feature of the GTNXi.
Regarding airports, you can always add your own User Waypoint using the Airport type, with a few digital taps on the screen, pleas refer to the manual for information on how to achieve this. The database that we provide is accurate to whatever a real pilot would see in the airplane, whatever may be missing are very small, private airports, hence the ability to add these yourself.
Good luck.