Black screens after new and update PA28 (Just Flight)

[Slowflyer]

I just downloaded the new version of Just Flight PA28 Turbo Arroow IV and I get black screens in game. 

The trainer works externally and if I press "Alt.Gr" and click on the GTN 750 you can see that it is active but it does not show in the cockpit integration.

What could be wrong?

It does work on other airplanes it is just this one that I cant make it work.

Edit: If I start it on the runway it does work, it is from cold and start it does not power up

[topcat1952]

Same problem. Had to manually start the TDS Xi 750 Manager (not the installer) so that the icon/splash screen came up. Then, when in the aircraft, select the TDS radio in the EFB and VERY IMPORTANT, turn the left knob on the nav lights all the way on. Wait a few seconds and then it should appear.

In the sim, go to your Files, search TDS and make sure the instrument has not been disabled. If not, in the airplane, check the left-most knob (as mentioned above). It has to be all the way on. The GPS then takes a few seconds to load.

Hope this helps.

[Slowflyer]

Same problem. Had to manually start the TDS Xi 750 Manager (not the installer) so that the icon/splash screen came up. Then, when in the aircraft, select the TDS radio in the EFB and VERY IMPORTANT, turn the left knob on the nav lights all the way on. Wait a few seconds and then it should appear.

In the sim, go to your Files, search TDS and make sure the instrument has not been disabled. If not, in the airplane, check the left-most knob (as mentioned above). It has to be all the way on. The GPS then takes a few seconds to load.

Hope this helps.

Thanks mate, I did not bother to turn up the radio lights since I used the GTN so that solved it.

Much appreciated.

[adminOwner2]

Hello,

We are in contact with JustFlight on the matter of the brightness, as a fix will need to come from their side.