I did a first impressions video that runs through using the GTNXi with the SR22 in MSFS.

There are definitely some things required to be able to stop using my P3D setup for proficiency...  Most of these items are Known to TDS and I am not harping on it.

The most obvious item is getting the GPS course and the Glide Path data into the sim.  Without it the Flight Director can't be flown in Approach mode and the PFD/AP modes are not matching what stage of flight you really are in... ie Pitch Mode when should be GPS on the Approach and the GP does not annunciate and instead you get the white GS that will never Register as captured.  Plane flies down on Autopilot but... well you get the point.  Looking forward to see this product Grow if you can get the support from Asobo to give you the hooks you need.

https://youtu.be/ivU_PqT1kDs

Hi,

When installing the GTNXi from the manager I ran into a bit of an "issue" and I wanted to share it with you so you can add it to the FAQ

If you have the Garmin Trainer already installed on your computer (as I did) the Manager will see it and believe that it is installed and offers the Re-install..

After you install the TDS Application and it launches it will complain about not having access to the Trainer.  This is due to the fact that they NXi versions are not installed inside of the Garmin Trainer software.  I was using the trainer with the Non-Xi version and with the 375 (hey would be great if you enabled that unit as well   ) so the check does see the garmin trainer but I had to manually add the NXi from the Garmin Launcher...

I am sure that if I ran the Re-install from the TDS manager that would have worked as well... but thought I would share..

Les

Excuse my ignorance, but what is it?

PC trainer installs o.k. but I get an error installing the GTNXi program
Below is the content of TDSGPSManager.txt file:

[11/06/2021 10:05:52.126 00002ec4 INFO] TDSGPSManager.exe version 1.0.0.3
[11/06/2021 10:06:59.439 00002ec4 ERROR] Error deleting file
[11/06/2021 10:06:59.440 00002ec4 ERROR] Error writing file0 and product: 0
[11/06/2021 10:07:52.868 0000217c INFO] Failed Copying File: C:\ProgramData\TDS\GTNXi\FlightSimEXE\TDSGTNXiFlightSimEXE.exe, error: ERROR_ACCESS_DENIED
[11/06/2021 10:07:52.872 0000217c INFO] Failed Copying File: C:\ProgramData\TDS\GTNXi\FlightSimEXE\SimConnect.dll, error: ERROR_ACCESS_DENIED
[11/06/2021 10:07:52.880 0000217c INFO] Failed Copying File: C:\ProgramData\TDS\GTNXi\FlightSimEXE\TDSGTNXiFlightSimManual.pdf, error: ERROR_ACCESS_DENIED
[11/06/2021 10:13:06.127 00002ec4 ERROR] Error deleting file
[11/06/2021 10:13:06.127 00002ec4 ERROR] Error writing file0 and product: 0
[11/06/2021 10:14:03.306 000034b8 INFO] Failed Copying File: C:\ProgramData\TDS\GTNXi\FlightSimEXE\TDSGTNXiFlightSimEXE.exe, error: ERROR_ACCESS_DENIED
[11/06/2021 10:14:03.310 000034b8 INFO] Failed Copying File: C:\ProgramData\TDS\GTNXi\FlightSimEXE\SimConnect.dll, error: ERROR_ACCESS_DENIED
[11/06/2021 10:14:03.318 000034b8 INFO] Failed Copying File: C:\ProgramData\TDS\GTNXi\FlightSimEXE\TDSGTNXiFlightSimManual.pdf, error: ERROR_ACCESS_DENIED
[11/06/2021 10:15:07.902 00002ec4 INFO] Exiting WinMain

Hi,

I am currently using:

-P3d4.5
-A2A piper comanche  
-1:1 home cockpit replica
-flight1tech g750 standalone product. I use it in a second mini pc inside the cockpit, in the same network.



A2A is in development of the comanche in MSFS, So I ill migrate.
I need a gtn750 software to use in my cockpit. And I have found this one. I will purchase it in the next days.
My questions are:
-is it posible to map the rotary knobs to make them work with keystrokes, joystick buttons or something like that?
-is it posible to run the software in a second pc in the network? This is VERY useful in the homecockpits world..

Thanks,
Arturo.

Is anyone else getting the Audio from the TDS Trainer only in their left ear?

If I run the Full Garmin Trainer Suite then I am getting audio in Stereo... but Run the TDS 750 and audio only in the left ear...

Sim running or Not audio only in the Left ear....

Hi, I have an issue with the GTN650. When I run it I get a flickering screen which does not allow me to press any keys. The GTN750 works fine. can anybody help?

Thanks

Ken Ockwell

hi 

Just to let you know that my old Ipad with twomon app are working perfect with TDS GTN 750
as a touch screen unit

I know is a very long shot, but I am writing this based in a similar situation we have a long time ago with a different kind of problem, that was resolved with the same idea. Again, I have no idea how all this is coded so I may be talking BS. The idea that occurred to me is that the jitters problem is due to some sort of number being sent/read from the simulator that is cut short in the numbers of decimals, or rounded up or something similar and the cure is to send/read the number complete... just worth trying if that may be the solution... ?

hi please help
I just install tds gtn  follow every step, I have connection with the sim but cant power
the unit.. trainer works ok