Hi

I have just startet with MSFS 2020 this month, and almost the only reason for me to buy this simulator was the HPG H145 and a GTN 750 that uses the Garmin Trainer in the background. The TDS GTNXi!!

So many thanks for a great product!

There is still one challenge. The TDS GTNXi is locked to Jeppesen Fixed Wing navigation database. Even if the database selection is different in the Garmin Aviation Trainer Launcer (PC Trainer).
The result is that I can't fly helicopter appproach (LNAV/LPV).   

Is it possible to make TDS GTNXi offer a selection of which database to use? Or at least force the TDS GTNXi to use the same database as selected in Garmin Aviation Trainer Launcer? That would be fantastic

Garmin Aviation Trainer Launcer:
Selection of a fixed wing aircraft in the Avionics tab together with Jeppesen in the settings tab will use nav_db2.bin (TDS)
Selection of a fixed wing aircraft in the Avionics tab together with Garmin in the settings tab will use nav_db2_grm.bin
Selection of Rotorcraft in the Avionics tab together with Jeppesen in the settings tab will use nav_heli_db2.bin
Selection of Rotorcraft in the Avionics tab together with Garmin in the settings tab will use nav_heli_db2_grm.bin
C:\ProgramData\Garmin\Trainers\Databases

A flightplan crossfill would also be great   
I notice there allready is a crossfill of the transponder code.

André

I am using Little Navmap, and have the multiexport flight plan option "'GARMIN 'TDS GTNXi with user defined waypoints'" selected, and in the correct folder to load into the GTX.

I can load the flight plan into the GTXNi, however, no matter what I try, it will not load the approach vectors or the selected runway into the flight plan.

I believe it used to load them.  Does anybody have any ideas on why it quit loading them?

Is there a setting that got turned off?

Thanks in advance,
Frank

I'm getting a blank GTNXI 750 screen in sim after a reinstall.
Everything seems to have installed correctly but I did get a message that I "exceeded my number of downloads".
The TDS Manager connects to sim but the 750xi screen in blank.

Any help or recommendations would be appreciated.

Do I need to send the log file?
I can email that to you if needed.

Thanks.

I saw a post saying that there is an update http://www.forum.tdssim.com/archive/inde...20V3.6.4.0

However, maybe i have misunderstood something or i am missing something but i can\'t follow the instruction in that post.

See text below:

To update, start the Aviation Trainer Launcher, access the Version Manager tab, make sure to press the "Check for Updates" button, then "Update" to the latest Aviation Trainer Launcher.
Alternatively you can use the TDS GPS Manager and Update to the Aviation Trainer Launcher V3.6.4.0

I only have the panels in the cockpit of the planes and i also have the TDS GTNXi Flight Sim - 1.0.2.3 as an icon and if i click on that i see this screen. Only for configuration i think

I don't seem to have either the TDS GPS Manager or the Aviation Trainer Launcher.
If i launch a plane with the GTNXi panels (in my case the C414) and fire them up, it says 20.20.10 Trainer in the window and that i have TDS version 1.0.2.3. Is this the trainer launcher?

I feel that i am missing something here. I tried to find out on the tdssim webpage as well but i can't find anything about this there. 

Can anyone help me? 

PS. I tried to include screenshots but the file size was too big.

Thanks / Jan

               

Dear Sir again the old problem for black screen (see attachment).
What am I doing wrong?
Can you help me?

NOTE: TDS GTNXi 750 always works fine but I just reinstall windows (from zero) and have to install everything again and now black screen


WHAT MEANS: Exceeded install????


Thank you, 
Roberto Jucá

When using the GTN in Pop out mode I cant use the ALT button on the Citation or the Longitude? It spins but does not update PD,Is it possible to get it to work?

MSFS got blown up and I had to reinstall.   After reinstall, the Community folder was totally blown out so everything had to be reinstalled there.  Now time for the TDS GTN50xi; the trainer installed fine from the Manager (ran as Administrator) however, it refuses to reinstall the TDS GTNxi and goes to 'not responding' in Windows 10 Task Manager [EDIT] when attempting to exit Manager by 'X'ing out..  It indicates on the left side of the Manager that 1.0.3.0 is installed (already) however, there should be a file in the Community folder called "tds-gtnxi-gauge" (per a friend) and that does not exist and with the Manager refusing to reinstall, I am up a creek without a GTNxi. 

I have deleted the original Manager and downloaded a new one, same results.  I have tried to run Reinstall with MSFS running and not running, same results.  Numerous system restarts, same results.  MSFS is back working perfectly and the "Other brand" GTN50 works perfectly, but:
What do I need to do to get the GTNxi back running with the correct file in the Community folder?  Help please.

Background info:  i9 12900 CPU  3080 GPU 32 GB ram Quest 2 VR headset, Corsair Scimitar RGB Elite gaming mouse, USB Num Pad.

The 12 mouse side buttons are programmed with macros to move between the instrument views in the BlackSquare Kingair Analogue cockpit.  I have purchased the TDS GTNxi 750, installed it, and it works perfectly.

Here's the issue.  With the VR headset on, I use the numpad to respond to ATC.  If the blue highlighter on the TDS GTNxi 750 panel is active on the comm or nav radio boxes, the numpad responses don't work.  The little highlighter has to be located at the bottom of the screen (on map flt pln traffic) for the numpad responses to work.  This means that when I change comm or nav frequencies, I have to use the "push" function on the little control knob (bottom right) to move the highlighter back down to the bottom of the panel to acknowledge directions given by ATC.  

I don't know this for sure, but I would imagine that the mic button on the yoke in a real Kingair would work regardless of where the little highlighter is sitting.

Any ideas?

JIm

I own the Black Square Analogue gauge King air and use it with the TDS GTN750xi, and when the GTN 750 is selected using the hot swap function, the TO/GA button no longer brings up the flight director on the artificial horizon.  The function works when I select any other combination of the GNS530, kns-80, but fails when the 750 is selected

I had significant problems with Win11 and tried several times to install the TDS GTXi. Please give me the opportunity to reinstall TDS GTXi. Thank you.