My TAWS system (GTN 750) does not pass the diagnostic at start up. What causes this and how can I rectify it?
Ramius
Hello Ramius,
If you start the standalone Aviation PC Trainer and select the GTN750Xi, does the TAWS work? Ideally, a solution would be to reinstall just the Aviation PC Trainer/GTNXi PC Trainer component.
Good luck and please let us know how it goes.
Hi,
ran across the same error TAWS System Fail, GPS System Fail (BKSQ_AnalogKingAi).
Reinstall did not fix the problem. The PC Trainer works.
Could need some help
Update: Msg shown "Radar Altimeter source inoperative or connection to GTN lost"
With the TDS GTNXi closed, preferrably after a PC reboot, please navigate to this folder:
C:\ProgramData\Garmin\Trainers
Then erase only these folders:
Navigator_XI_1 to Navigator_XI_4
(01-02-2023, 09:32 PM)adminOwner2 Wrote: [ -> ]With the TDS GTNXi closed, preferrably after a PC reboot, please navigate to this folder:
C:\ProgramData\Garmin\Trainers
Then erase only these folders:
Navigator_XI_1 to Navigator_XI_4
Thanks for your help, I deleted the Navigator_XI_1 and Navigator_XI_3 folders, but this did not solve the problem
This is because the aircraft may not be equipped with the selected TAWS mode. Switch from TAWS A to B and it should be fine.
(01-05-2023, 09:56 AM)Ahmed Wrote: [ -> ]This is because the aircraft may not be equipped with the selected TAWS mode. Switch from TAWS A to B and it should be fine.
Great Ahmed,
Thank you!!! As suggested, I changed TAWS from A to B. This solved the problem.
(01-05-2023, 09:56 AM)Ahmed Wrote: [ -> ]This is because the aircraft may not be equipped with the selected TAWS mode. Switch from TAWS A to B and it should be fine.
Thankyou - you hit the nail squarely on the head!
Fixed now, and no more "TAWS fails".
