TDS Sim Software Forums

This is for using the PESIM Maule M7 with TDS GTNXi 750/650 in use. TDS pro version (latest) in use.
At least half of the time the sim crashes after take off, level out, and attempting to to use the radio (e.g., switch frequencies). Typical setup is start cold & dark, start the engine, program the 750 (flight plan, nav frequencies). Take off, climb to altitude (4000-6000 ft), level off. At this point attempting to change frequencies (flip/flop) will cause an immediate crash of the sim. This has not changed through any update of either the M7 nor the TDS product.
Of course I do not know if this is a TDS product issue or an interaction between them. A testing procedure to check or solution would be appreciated.

Hello,

The TDS GTNXi is an external executable that works via SimConnect, outside of Flight Simulator. Because of this, it is very hard, if not possible, to crash flight simulator.
Are you running other software inside flight simulator?

Can you test the exact same flight/procedure/flight plan/frequencies using another add-on aircraft with TDS GTNXi VC integration, to confirm or infirm the crashes?

Most likely the crash source is not the TDS GTNXi.